1. A.A.Hashem, R.E.Peachok, “Aerodynamic Interactions Between Compressor Blades and Circumferential Temperature Distortions”, International Journal of Heat and Fluid Flow, Vol. 1, pp 133-141, 1975.

2. R.E.Peachok, A.A.Hashem, “Stagnation Temperature and Pressure Distortion Effects Upon the Response of an Aerofoil”, International Journal of Heat and Fluid Flow, Vol. 2, pp 19-27, 1980.

3. O.El-Shazly, A.A.Hashem, “Analysis and Correction of Toppled Thrust Vector Missiles”, 1st ASAT Conference, Military Technical College, GC-8 pp 989-996 Classified, GC-8 pp 989-996 Classified, 1985.

4. A.A.F.Hashem, M.A.Gobran, “Interactions of Gas path Analysis with Engine off Design Constraints”, AME 4th Conf., Military Technical College, Me-2 pp 13-19, 1990.

5. A.A.F.Hashem, M.M. EL Medaany, “Simulation for Modular Aero Engine Maintenance Management”, AME 4th conf., Military Technical College, Me-2 pp 13-19, 1990.

6. A.A.F.Hashem , M.N.Abulfotouh, “Interactions of Turbine Rotor Cooling and Blade High Temperature Low Cycle Fatigue Life”, J. of Engineering and Applied Science, Vol. 38, No.3, pp 601-616, 1990.

7. S.D.Hasan, M.N.Abulfotouh, M.S.Bayoumi, A.A.F.Hashem, “Design and Prototype Production of Small Wind Tunnel for Low Wind Speeds”, J. of Technology, Egyptian Syndicate of Engineers, Vol. 1, No. 1, 1994.

8. F.M.Owis, A.A.F.Hashem, B.E.Argoun, “A Dynamic Model for Predicting the Transient Response of Liquid Rocket Engines”, International Conf. of Fluid Mechanics, Cairo 1995.

9. Y.Abdel Hameed, A.A.F.Hashem , I.M.A.Shabaka, “Ignition Transient of Solid Propellant Rocket Motor”, J. of Engineering and Applied Science, Vol. 44, No. 1, pp 95-107, 1997.

10. M.M.Idres, A.A.F.Hashem, I.M.A.Shabaka, “A Quasi-Three Dimensional Approach to the Design of Analysis of Turbomachines”, J. of Engineering and Applied Science, Vol. 45, No.1, pp 119-134, 1998.

11. A.A.F.Hashem, T.R.Nada, “Non-Linear Turbofan Engine Simulation with Emphasis on Transient Operating Limits”, J. of Engineering and Applied Science, Vol. 46 No. 4, pp 661-677, 1999.

12. A.A.F.Hashem, T.R.Nada, “Design of Turbofan Engine Controller Based on Non-linear Analysis”, J. of Engineering and Applied Science, Vol. 48 No. 1, pp 137-153, 2001.

13. W.A.Aissa, A.A.Hashem, “Experimental Analysis of Thrust Control Using External Vanes”, 15th International Symposium on Airbreathing Engines, Paper ISABE 2001-1186, India, Bengalore, 2-7 Sep. 2001.

14. W.A.Aissa, A.A.Hashem, “Experimental Investigation of Axisymmetric Nozzle-Vanes-Plug TVC Arrangement”, 15th International Sessions in 39th Aircraft Symposium, JSAA, Oct. 2001.

15. A.A.Hashem, W.A.Aissa, “External Vanes Floating Plug Nozzle Thrust Vector Control”, 7th International Congress on Fluid Dynamics and Propulsion, Paper ICFDP7-2001075, Cairo, Dec 2001.

16. F.M .Owis, A.A.Hashem, “Numerical Computations of Two Phase Flow in Small Thrusters for Satellite Control”, AIAA pap 2003-4263, 2003.

17. A.A.Hashem, “Design and Testing of a Cold Gas System”, ESA 4th International Conference on Spacecraft Propulsion, Session 3 SC, Chia La Guna, Italy, 2-4 June 2004.

18. T.R.Nada, A.A.Hashem, “Neuro-Fuzzy Approach for Performance Optimization of Variable nozzle turbofan engine”, Aeronautical Journal, March 2005.

19. A.A.Hashem, “Modeling of Monopropellant Space Propulsion System”, 11th International Congress on Aerospace Science & Aviation Technology, Military Technical College, Cairo, Egypt, May 17-19 2005.

20. A.Elnashar, K. M. S. Eldalil, A.A. Hashem, M. M. Abdelrahman, Theoretical and Experimental Study of Centrifugal Compressor Impellers, Proceedings of the Ninth International Congress of Fluid Dynamics & Propulsion, ICFDP9-EG-243, Alexandria Egypt, Dec. 2008.

21. T. R. Nada, A. A. Hashem, 2012, Geometrical characterization and performance optimization of monopropellant thruster injector, The Egyptian Journal of Remote Sensing and Space Sciences, pp 161–169.

22. Mohammed Kamel, Farouk Owis*, Moumen Idres and Aly Hashem, 2015, Numerical simulation of supersonic and turbulent combustion with transverse sonic fuel injection, Int. J. Engineering Systems Modelling and Simulation, Vol. 7, No. 1,pp35-61.

23. E.A. Sadek, and G.M. El-Bayoumi, “An Optimality Criterion Method for Structural Optimization problems”, Scientific Eng. Bulletin, Faculity of Engineering, Cairo University, No. 3, pp. 199-218, 1984.

24. S.D. Hassan, G.M. El-Bayoumi, and M.S. Bayoumi, “Modified Pole-Zero Placement Controllers for Better Set-Point Tracking”, Scientific Eng. Bulletin, Faculity of Engineering, Cairo University, No.3, Vol. 36, pp 766-784, 1989.

25. S.D. Hassan, and G.M. El-Bayoumi, “Multi Variable Set Point Tracking Using Pole Zero Placement Controllers”, Fifth Aeronautical Sciences & Aviation Technology Conference, ASAT, Military Technical College MTC, Cairo, 4-6 May1993.

26. G.M. El-Bayoumi, “Effects of Lag Controllers on the Transient Response of Discrete Time Systems”, Proceedings of the 6th AMME Conference, pp. 241-250, 5 May 1994.

27. G.M. El-Bayoumi, “On the Robustness of Low Order Herwitz Polynomials”, Proceedings of the 6th AMME Conference, pp. 251-260.

28. G.M. El-Bayoumi, “Closed Form Solution For The Numerator Polynomial of Sampled Data Systems”, Proceedings of the 6th ASAT Conference, GC-4 47-55.

29. S.D. Hassan, G. M. El-Bayoumi, and Kh. Abdel-Motagaly ,”Longitudinal Autopilot Design for Large Scale Flexible Missile Using LQR Control”, Engineering Research Journal, Faculty of Eng. & Tech., University of Helwan, Vol.5,pp. 91-104.

30. S.D. Hassan, G. M. El-Bayoumi, and Kh. Abdel-Motagaly, “Altitude Control of Large Scale Flexible Missile Using Self-Organizing Fuzzy Logic Control” 6th Cairo University Conference On Mechanical Design and Production, , pp. 741-754, January 1996.

31. M.I. Kamel and G.M. El-Bayoumi, “Design and Implementation of a High Performance Target Tracking System Using Classical and Fuzzy Controllers”, Fourth Middle East power System Conference MEPCON’96, Assiut Univ., Egypt, pp. 319-323, 1996.

32. S.D. Hassan, G. M. El-Bayoumi, and Kh. Abdel-Motagaly, “Two New Learning Algorithms for Rules Modification in Self-Organizing Fuzzy Logic Controllers”, Journal of Engineering and Applied Science, Faculty of Eng., Cairo Univ., pp. 765-780, Vol. 43, No. 4, Aug. 1996.

33. S.D. Hassan, G. M. El-Bayoumi, and A. El-Shabi, “Glide Slope Coupler and Automatic Flare using Fuzzy Logic Control”, The third International Conference on Eng. Mathematics and Physics, ICEMP 97, Cairo University, Vol.,1 pp 220-230, Dec. 1997.

34. S.D. Hassan, G. M. El-Bayoumi, and Kh. Abdel-Motagaly , “Application of Fuzzy Logic Control to the Lonitudinal Autopilot of Large Scale Flexible Missile”, The third International Conference on Eng. Mathematics and Physics, ICEMP 97, Cairo University, Vol.,1 pp 296-308, Dec. 1997.

35. S.D. Hassan, G. M. El-Bayoumi, and H.M. Omar, “Adaptation of the Classical PID and Fuzzy Controllers”, 6th Conference on Theoritical and Applied Mechanics, Academy of Scientific Research and Techonolgy in Cairo, pp 225-241, March1999.

36. S.D. Hassan, G. M. El-Bayoumi, and H.M. Omar, “Application of Fuzzy Logic Control to the Spacecraft Attitude Control”, 6th Conference on Theoritical and Applied Mechanics, Academy of Scientific Research and Techonolgy in Cairo, pp 242-258, March 1999.

37. G.M. El-Bayoumi and M.H. Gobran, “Fuzzy Logic Control of A High Bypass Turbofan Engine”, Mansoura Engineering Journal (MEJ), Vol. 24, No. 2, pp m21- m33, June 1999.

38. S.D. Hassan, G. M. El-Bayoumi, and M.A. Mohammed, “ Automatic Lateral Beam Guidance using Classical, Fuzzy, and Indirect Self Organizing Control”, Journal of Engineering and Applied Science, Faculty of Eng., Cairo Univ., pp. 905-921, Vol. 46, No. 5, Oct.1999.

39. S.D. Hassan, M.B. Argoun, G.M. El-Bayoumi, O.M.M. Omer, “Orbit Maintenance for Small Using Electric Propulsion”, Proceedings of the 9th International ASAT Conference, Miltary Technical College, Cairo, Paper GC-07, pp 1017-1032, May 2001.

40. G.M. El-Bayoumi, “Design of Stable Controllers for Model Following Discrete Time Systems using Approximate Inverse System”, Mansoura Engineering Journal (MEJ), Vol. 26, No.4, pp. M.1-M.13, December 2001.

41. G.M. El-Bayoumi, “Time Optimal Satellite Attitude Maneuvers in Space”, Proceedings of the 10th International AMME Conference, Miltary Technical College, Cairo, pp. 175, 189, 14- 16 May 2002.

42. G.M. El-Bayoumi, “Momentum Biased Satellite attitude Stablization using PDcontroller with Fuzzy Gain Adjustment”, Mansoura Engineering Journal (MEJ),Vol. 27, No.4, pp. M. 23-M. 40,December2002.

43. 21. M.S. Ahmed, M.S. Bayoumi, A.H. Kassem, and G.M. El-Bayoumi, “Fault Diagnosis of Hydraulic Cylinder Ciruit using Neural Network”, Proceedings of the 11th AMME Conference, pp.,23-25 November 2004.

44. M.S. Ahmed, M.S. Bayoumi, A.H. Kassem, and G.M. El-Bayoumi, “Fault Diagnosis of Hydraulic Variable Displacement Swash Plate Axial Oiston Pump using Neural Network”, Proceedings of the 11th AMME Conference, pp.,23-25 November 2004.

45. T.M. Habib, A.H. Kassem and G.M. El-Bayoumi, “GPS-Based Small Satellite Position And Attitude Determination Simulator”, Journal of Engineering and Applied Science, Faculty of Eng., Cairo Univ., pp., Vol., No. , Feb. 2005.

46. M.S. Bayoumi, S.D. Hassan, G.M. El-Bayoumi, And B.R. Nairouz “Reaction Wheel Momentum Dumping Using Magnetic Field Model”, 8th Conference on Theoritical and Applied Mechanics, Academy of Scientific Research and Techonolgy in Cairo, pp -, 5-7 April 2005.

47. El Tantawy M.A., Abd El Rahman M.I., El-Bayoumi G.M., and El Soaly E.E, ”Nonlinear Control of Magnetic Bearing System with Adaptive Neuro Fuzzy Controller”, 8th Conference on Theoritical and Applied Mechanics, Academy of Scientific Research and Techonolgy in Cairo, pp -, 5-7 April 2005.

48. Abdelhadi M.E., Amgad M.B., and G.M. El-Bayoumi, “An Improvement of Longitudinal Flying Quality of HSCT Aero-Elastic Mode using GPC Techniques”, Proceedings of the 12th AMME Conference, pp., 16-18 May 2006.

49. T.M. Habib, S.D. Hassan and G.M. El-Bayoumi, “Spacecraft Attitude and Attitude Rate Estimation Using Hybrid Kalman Filtering of Magnetometer Measurements”, Proceedings of the 12-th International Conference on Aerospace science and Aviation Technology (ASAT), 2007.

50. Maya M. emarah, A.H. Kassem, and G.M. El-Bayoumi, “Modeling and Control Multi Flexible Link Robot”, Proceedings of the 6-th International Conference on electrical Engineering, 2007.

51. A.M. Omran, A. Kassem, G. El-Bayoumi, and M. Bayoumi, “Genetic Algorithm Based Optimal Control for a 6-DOF Non Redundant Stewart Manipulator”, International Journal of Mechanical Systems Science and Engineering (IJMSSE) 2;2 © www.waset.org Spring 2008, pp73-79.

52. A. Omran, A. Kassem, G. El-Bayoumi, and M. Bayoumi, “Mission-Based Optimal Control of Stewart Manipulator”, Journal of Aircraft and Aerospace Technology, Vol. 81, No. 3, pp 226 -233, 2009.

53. A. Omran, M. Gharib, and Gamal El-Bayoumi, “Static Output Feedback Controller for Structural Acoustics System”, Proceedings of the 12-th International Conference on Aerospace science and Aviation Technology (ASAT), 2009.

54. A.M. Omran, M. Bayoumiu, A.H. Kassem and G.M. El-Bayoumi, “Simulation and Control of a Six-DOF Non-Redundant Stewart Manipulator”, accepted in the International Journal of Mechanical Systems Science and Engineering (IJMSSE),2008.

55. H.E. Taha, M. Bayoumi, G.M. El-Bayoumi, and S.D. Hassan, “Model Reference Adaptive Flight Path Stabilization for Altitude and Velocity Control”, Proceedings of the 12-th International Conference on Aerospace science and Aviation Technology (ASAT), 2009.

56. H.E. Taha, M. Bayoumi, G.M. El-Bayoumi, and S.D. Hassan, “Aircraft Guidance System Logic Design for a Fully Autonomous Mission”, Proceedings of the 12-th International Conference on Aerospace science and Aviation Technology (ASAT), 2009.

57. M.R. Ahmed, M.M. Abdelrahman, M.M. ElNomrossy, and G.M. El-Bayoumi, “Optimal Wing Twist Distribution for Roll Control of MAVs”, To be presented in the 4th International UAV Conference 2010, in Frankfurt, Germany.

58. M.R. Ahmed, M.M. Abdelrahman, M.M. ElNomrossy, and G.M. El-Bayoumi, “Aerodynamic Shape Optimization of Micro Air Vehicle Wing”, 10th Int. Congress of Fluid Dynamics (ICFD10), Dec. 16-19, Ain Soukhna, Red Sea, Egypt.

59. A.S. Kraza, M. S. Bayoumi, and G. M. El-Bayoumi, “Stochastic Modeling Of Mems Based Inertial Sensor Errors”, Al Azhar Engineering 11th International Conference 2010.

60. O. Mohamadi, B. El-Hadidi, M. Bayoumi, and G.M. El-Bayoumi, “Analysis, and Implementation of a Sound Tracking System to Intercept a Moving Object ”, Proceedings of the 14th International Conference on Aerospace science and Aviation Technology (ASAT), 2011.

61. A.S. Kraza, M. S. Bayoumi, G.M. Elbayoumi, and S.D. Hassan, “Modeling Inertial Sensor Errors Using Allan Variance”, Mansoura Engineering Journal (MEJ), Vol. 36, No. 1, pp. E1-E10, March 2011.

62. A.S. Kraza, M. S. Bayoumi, and G. M. El-Bayoumi, “Loosely Coupled GPS/INS Integr

ation for Land vehicle Navigation”, Journal of Al Azhar University Engineering Sector JAUES, 2011.

63. Gharib M., Omran A. and El-Bayoumi G. “Optimal vibration control for structural-acoustic coupling system”, Journal of Vibration and Control, Vol. 19, pp. 114-29, 2012.

64. M. Fouda, M.Tawfique, and G.M. El-Bayoumi, “Calibration of the Hysteresis Loop of SMA wires Heated by Electric Current”, Proceedings of the 15th AMME Conference, May 2012.

65. M.R. Ahmed, M.M. Abdelrahman, M.M. ElNomrossy, and G.M. El-Bayoumi, ” Aerodynamic shape optimisation,wind tunnel measurements and CFD analysis of a MAV wing”, The Aeronautical Journal July 2012 Volume 116 No 1181.

66. M.B.Eteiba, G.M.El-Bayoumi, and M.S.El-Negamy, ‘Modeling and Simulation of Egyptsat-1 Satellite System Powered by Photovoltaic Module’, Journal of American Science, pp 110-116, 2013;9(1).

67. M.B.Eteiba, G.M.El-Bayoumi, and M.S.El-Negamy, ‘Design of Electrical Power Subsystem for Low Earthing Orbit Satellite’, Journal of Al Azhar University Engineering Sector (JAUES).

68. A. Khalil, M. ElNomorossy, G.M. El-Bayoumi, and M.S. Bayoumi, “Flight Dynamics, Stability, and Control of a Flexible Airplane”, Proceedings of the 15th International Conference on Aerospace science and Aviation Technology (ASAT), May 28-30, 2013, MTC, Cairo, Egypt.

69. M.Abdelrahman,A.M. Bayoumy, G.M. El-Bayoumi, and M.S. Bayoumi, “Egypt.Vision-Based Road Tracking of Wheeled Mobile Robot”, Proceedings of the 15th International Conference on Aerospace science and Aviation Technology (ASAT), May 28-30, 2013, MTC, Cairo.

70. Maya M. Emarah, M.Khalil, and G.M. El-Bayoumi, “Control of Underactuated Acrobat System Using Partial Feedback Linearization”, Proceedings of the 16th AMME Conference, May 27-29, 2014.

71. Tarek N. Deif, Aymen H. Kassem, and Gamal M. El-Bayoumi, “Modeling and Attitude Stabilization of Indoor Quad Rotor”, International Review of Aerospace Engineering (I.RE.AS.E), Vol.7,N2 June 2014.

72. Tarek N. Deif, Aymen H. Kassem, and Gamal M. El-Bayoumi, “Modeling and Robust Attitude Stabilization of Indoor Quad Rotor using Fuzzy Logic Control”, International Review of Aerospace Engineering (I.RE.AS.E), Vol.x,Nx June 2015.

73. 1. T.S. Luu, M.M. Abdelrahman and Y. Ribaud, “Transonic Flow Analysis in an Impeller Equipped with Splitter Blades” 25th Annual International Gas Turbine Conference and 22nd Annual Fluid Enineering Conference, ASME, New-Orleans, USA, 9-13 Mars 1980, Also Published as ONERA T.P. No 1980-13, Chatillon, France,1980.

74. M.. M. Abdelrahman, “Contribution to the Calculation of Transonic Flows with an Implicit Pseudo-Unsteady Method” Journal of “La Recherche Aerospatiale” , ONERA, Chatillon, France, No 6, Nov-Dec. 1981.

75. M. M. Abdelrahman, “An Implicit Time Marching Method for the Calculation of Transonic Flow using Euler Equations “ Fourth international Conference for mechanical Power engineering , Cairo , Egypt , October 1982. Also Published as ONERA T.P. No. 1982-111, Chatillon, France, 1982.

76. M. M. Abdelrahman, “Implicit Pseudo-Unsteady Method for Solving Euler Equations in Transonic Flow” Journal of “La Recherche Aerospatiale” , ONERA, Chatillon, France, No2, Mars-Avril 1983.

77. M. M. Abdelrahman, “Development of a Short Computation Time Implicit Method for C

omputing Transonic Flows With Strong Shock Waves” , AIAA Paper No. 83-7014 Presented in the Sixth International Symposium On Air Breathing Engines, Paris, 6-10 June 1983. Also Published as ONERA T.P. No. 1983-50, Chatillon, France.

78. M. M. Abdelrahman, And A. O. Sherif, “Calculation of One-Dimensional Transonic Flow using Micro-Computers”, First Aeronautical Sciences & Aviation Technology Conference, ASAT , Military Technical College MTC,Cairo, 14-16 May 1985.

79. G.B. Salem and M. M. Abdelrahman, “Inviscid Solution for the Compressible Flow in Curved Ducts Using Micro-Computer “, Eleventh International Congress for Statistics, CSSDR, Cairo, Egypt, 29 March-3 April1986.

80. M. M. Abdelrahman, ” Implicit Time Dependent Method for the Calculation of Transonic Blade-to-Blade Flows With Strong Shock Waves”, Second Applied Mechanical Engineering Conference, AME, Military Technical College MTC, Cairo, 6-8 May 1986.

81. M. M. Abdelrahman, and G.B. Salem, “Calculation of a Three- Dimensional Compressible Distorted Flow in a Curved Duct”, Third Applied Mechanical Engineering Conference, AME, Militory Technical College MTC, Cairo, 12-14 April 1988.

82. M. M. Abdelrahman, “Computation of Three-Dimensional Transonic Flow in a Centrifugal Impeller using Euler Equations”, Third Applied Mechanical Engineering Conference, AME, Military Technical College MTC Cairo, 12-14 May 1988 Also Published as AIAA Paper No 88-3731 presented in the First National Fluid Dynamics Congress, NFDC, Cincinnati, Ohio, U.S.A., 25-28July 1988.

83. M. M. Abdelrahman and G.B. Salem , “Distorted Flow in a Curved duct”, Third Aeronautical Sciences & Aviation Technology Conference, ASAT, Military Technical CollegeMTC, Cairo, 4-6April 1989.

84. G.B. Salem and M. M. Abdelrahman, “Theoretical Prediction of Aerodynamic Characteristics for Slender Finned Vehicles”, Third Aeronautical Sciences & Aviation Technology Conference, ASAT, Military Technical College MTC, Cairo, 4-6 April 1989.

85. M. M. Abdelrahman and A. M. Al-bahi, “Optimal Smooth and Orthogonal Grid Generation” Third Saudi Engineering Conferenc, King Soud University, Riiyadh, Saudi Arabia, 24-27 Nov., 1991, Also Published in the tenth International Symposium on Air Breathing Engines, ISABE, Nottingham, England, United Kingdom, 1-6 September, 1991.

86. M. M. Abdelrahman “Unsteady Analysis for Quasi-one-Dimensional Viscous Heat Conducting Compressible Fluid” AL- Azhar Engineering Second International Conference, AEC’91, Al-Azhar University, Egypt, 21-24 December, 1991. Also Published in the Fourth International Conference of Fluid Mechanics, ICFM4, Alexandria, Egypt, 28-30 April 1992.

87. A. M. Al-Bahi, G. A. Nassef and. M. M. Abdelrahman, “Heat Transfer and Fluid Flow in GTA and GMA Weld Pools” Fourth International Conference of Fluid Mechanics, ICFM4, Alexandria, Egypt, 28-30 April 1992.

88. A. M. Al-Bahi, and. M. M. Abdelrahman, “Numerical Simulation of Aircraft Prescribed Maneuvers” Eleventh International Association of Science and Technology for development, IASTED, Modelling, Identification and control, Innsbruck, Austria, February 10-12, 1992. Also Published in the International Journal of Modelling and simulation, Vol 13, No 4, 1993.

89. M. M. Abdelrahman, M. A. Ghazi, I. A. Olwi and A. M. Al-Bahi, “ Aircraft Spoiler Effects Under Wind Shear” AIAA paper No 92-2642 presented at the AIAA 10th Applied Aerodynamics Conference, Palo Alto, CA, 22-24 june 1992. Also published in the AIAA journal of Aircraft, Vol. 31 No 1, january- February 1994.

90. M. M. Abdelrahman, and A. M. Al-Bahi, “Numerical Solution of the Unsteady Incompressible Navier-Stokes Equations in Generalized Non- Orthogonal Curvilinear Coordinates”, Fifth Aeronautical Sciences & Aviation Technology Conference, ASAT, Military Technical College MTC, Cairo, 4-6 May 1993.

91. M. M. Abdelrahman. M. A. Ghazi, I.A. Olwi and A. M. Al-Bahi, “Strake-Wing-Body Configuration under the Effect of Trailing Vortices” , Fifth Aeronautical Sciences & Aviation Technology Conference, ASAT, Military Technical College MTC, Cairo, 4-6 May 1993.

92. A. M. Al-Bahi, M.S. Aly, M. M. Abdelrahman and M. A. Ghazi, “An Experimental Investigation on a Manoeuvring Strake-Wing-Body Configuration”, Fifth Aeronautical Sciences & Aviation Technology Conference, ASAT, Military Technical College MTC, Cairo, 4-6 May 1993.

93. M. M. Abdelrahman, “Numerical and Experimental Investigations of the Flow Field Past Airfoil-Spoiler Configuration” First Pacific International Conference on Aerospace Science and technology, PICAST’I, Tainan, Taiwan, Rep. of China, 6-9 December, 1993.

94. M. M. Abdelrahman, “Effect of Leading Edge Modifications on Wing Characteristics” , AL-Azhar Engineering Third International Conference, AEC’93, Cairo, Egypt, 18-21 December, 1993.

95. G. A. Nassef, M. M. Abdelrahman, and A. M. Al-Bahi, “Prediction of Experimental TIG Weld Pool Profiles by a Heat and Flow Finite Difference Model” Sixth Applied Mechanics and Mechanical Engineering Conference (Second International) , AMME, Military Technical College MTC, Cairo, 3-5 May 1994. Paper No MS-9.

96. A. M. Al-Bahi,and M. M. Abdelrahman “Single Effective Control Law for an Aircraft Engine”, Sixth Applied Mechanics and Mechanical Engineering Conference (Second International), AMME, Military Technical College MTC, Cairo, 3-5 May 1994, paper No RA-1.

97. M. M. Abdelrahman.and A. M. Al Bahi, “A Generalized Technique for the Inverse Simulation of Aircraft Motion Along Predetermined Trajectories”, AIAA Paper No 94-3523, Also be presentes at the AIAA Atmospheric Flight Mechanics Conference, the Phoenician Scottsdale, AZ, 1-3 August 1994.

98. Nassef, G.A., Abdelrahman, M.M., and Al-Bahi, A.M., “ Finite Difference Modeling of Autogeneous TlG Weld Pool Profiles” Mansoura Engineering Journal, Vol.21, No.4, Dec . 1996 , Mansoura Univ., Egypt.

99. Al – Bahi , A.M.and Abdelrahman , M.M. “ On the Solution of Unsteady Viscous Incompressible Flow Problems,” AIAA Paper No. 96-0552 , 34th AIAA Aerospace Sciences Meeting & Exhibit , Reno, NV, USA , Jan. 15-18,1996.

100. Al – Bahi , A.M.and Abdelrahman , M.M “ Effect of Atmospheric Disturbances on the Inverse Simulation of Aircraft Motion ,” AIAA Paper No.96-3414 , AIAA Atmospheric Flight Mechanics Conference , San diego , CA , USA , July 29-31 , 1996.

101. Megahed , I.E., and Abdelrahman , M.M., “ Numerical model of Gas Flow in Solid Propellant Rocket Motors “ ASAT Sixth Conference, Military Tech College, Cairo , Egypt , 2-4 May 1995 . Also Published in the lnt .J. of Modelling and Simulation , Vol .17 , No .3, 231-241, 192.

102. Hassan M. and Abdelrahman , M. “ Variable fidelity design optimization of aircraft air intake “ 12-th International Conference on Aerospace Sciences & Aviation Technology, Paper No AER-08, Military Tech College, Cairo , Egypt,29-31May 2007.

103. Azab, M. B., Abdelrahman, M. M. and Mostafa, M. I. “ On the numerical solution of the inviscid two dimensional internal flows with non-orthogonal grids“12-th International Conference on Aerospace Sciences & Aviation Technology, Paper No CFD-03, Military Tech College, Cairo , Egypt, 29-31 May 2007.

104. Azab, M. B., Abdelrahman, M. M. and Mostafa, M. I. “ On the numerical solution of the inviscid three non circular nozzles with structured non-orthogonal grids“ 12-th International Conference on Aerospace Sciences & Aviation Technology, Paper No CFD-04, Military Tech College, Cairo , Egypt, 29-31 May2007.

105. Elnashar, A. , Wahba, W. and Abdelrahman, M. “ Three dimensional multi objective design optimization of centrifugal compressor impeller“ 12-th International Conference on Aerospace Sciences & Aviation Technology, Paper No TMN-03, Military Tech College, Cairo , Egypt, 29-31 May 2007.

106. M. M. Abdelrahman, M. M. Elnomrossy and M. R. Ahmed, “Development of Mini Unmanned Air Vehicles“ 13-th International Conference on Aerospace Sciences & Aviation Technology, Paper No US-02, Military Tech College, Cairo, Egypt, 26-28 May 2009.

107. M. A. Aziz, H. M. Elbana and M. M. Abdelrahman M. M. Abdelrahman, M. M. “Design Optimization of a Three Dimension Supersonic Intake Using CFD-RC Package” Tenth International Congress of Fluid Dynamics (ICFD10), Paper No ICFD10-EG-3013, Ain Soukhna, Egypt, December 16-19, 2010.

108. A. M. Alsayed, H. M. Elbana, and M. M. Abdelrahman “Design Optimization of a Thrust Augmentation Ejector Utilizing the CFD Tools” Tenth International Congress of Fluid Dynamics (ICFD10), Paper No ICFD10-EG-3015, Ain Soukhna, Egypt, December 16-19, 2010.

109. M. M. Abdelrahman, M. M. ElNomrossy, G. M. ElBayoumi, and M. R. Ahmed “Aerodynamic Shape Optimization of Micro Air Vehicle Wing” Tenth International Congress of Fluid Dynamics (ICFD10), Paper No ICFD10-EG-30765, Ain Soukhna, Egypt, December 16-19, 2010.

110. M. M. Abdelrahman, M. M. ElNomrossy, G. M. ElBayoumi, and M. R. Ahmed “Aerodynamic Shape Optimization of Micro Air Vehicle Wing” Tenth International Congress of Fluid Dynamics (ICFD10), Paper No ICFD10-EG-30765, Ain Soukhna, Egypt, December 16-19, 2010.

111. M. R. Ahmed, M. M. Abdelrahman, G. M. ElBayoumi, and M. M. ElNomrossy “Optimal Wing Twist Distribution fo Roll Control of MAVs” 4th International UAV World Conference, 3-4 November, 2010 and also published in The Aeronautical Journal, Volume 115, No 1172, October 2011.

112. M. R. A. Nabawy, M. M. ElNomrossy, M. M. Abdelrahman, and G. M. ElBayoumi “Aerodynamic shape optimization, wind tunnel measurements and CFD analysis of a MAV wing” The Aeronautical Journal, Volume 116, No1181, July 2012.

113. M.A.Aziz, F.M.Owis and M.M.Abdelrahman “Preliminary Design of a Transonic Fan for Low By-Pass Turbofan Engine”, International Review of Aerospace Engineering (I.RE.AS.E.), Vol. 6, No. 2, ISSN 1973-7459, April2013, pp. 114-127.

114. M.A.Aziz, H.M.Elbanna and M.M.Abdelrahman “High Fidelity Design Optimization of a Three Dimension Supersonic Intake”, 43rd Fluid Dynamics Conference, June 24-27, 2013, San Diego, CA, USA, AIAA paper No 2013-2462.

115. M.A.Aziz, F.M.Owis and M.M.Abdelrahman “Preliminary Design of a Transonic Fan for Low By-Pass Turbofan Engine”, 7th Ankara International Aerospace Conference, 11-13 September, 2013, METU, Ankara, Turkey, AIAC-2013-021, and also published in the International Review of AerospaceEngineering, June 2013.

116. M.A.Aziz, F.M.Owis and M.M.Abdelrahman “Design Optimization of Transonic-Fan Rotor Using Numerical Computations of Navier-Stokes Equations”, 7th Ankara International Aerospace Conference, 11-13 September,2013, METU, Ankara, Turkey, AIAC-2013-029.

117. A.M.Elsayed, F.M.Owis and M.M.Abdelrahman “Effect of blade-tip geometry on turbine losses and film cooling effectiveness”, 7th Ankara International Aerospace Conference, 11-13 September, METU, Ankara, Turkey, AIAC-2013-053.

118. A.M.Elsayed, F.M.Owis and M.M.Abdelrahman “Film Cooling Optimization Using Numerical Computation of the Compressible Viscous Flow Equations and Simplex Algorithm”, International Journal of Aerospace Engineering, Volume 2013, Article ID 859465. “http: //dx.doi.org /101155/ 2013/859465”.

119. A.M.Elsayed, F.M.Owis and M.M.Abdelrahman “Numerical Computation and Optimization of Turbine Blade Film Cooling “, Advances in Mechanical Engineering, Volume 2014, Article ID 528031. “http://www.hindawi.com/journals/ame/aip/528031”.

120. M.A.Aziz, F.M.Owis and M.M.Abdelrahman “Design Optimization of a Transonic-Fan Rotor Using Numerical Computations of the Full compressible Navier-Stokes Equations and Simplex Algorithm”, International Journal of Rotating Machinery, Article ID 743154, Volume 2014. “http: //dx.doi.org/101155/ 2014 /743154”.

121. T.M. Tawfik, B. Elhadidi, and M.M. Abdelrahman “Flow Control for NACA 4418 Airfoil using an Active Slat” 53rd AIAA Aerospace Sciences Meeting 2015, paper No 2015-0811.

122. M.A. Alhawwary, F.M. Owis, and M.M. Abdelrahman “Numerical Simulation of the flowfield around airfoil with spoiler using the higher order spectral difference method” 53rd AIAA Aerospace Sciences Meeting 2015, paper No 2015-1499.

123. Yassir Abbas and M. Madbouli Abdelrahman ” Implementation of the panel method to the solution of flow around aircraft” 3rd International Workshop on Numerical Modeling in Aerospace Sciences, NMAS 2015, Bucharest, Romania, 6-7May 2015. Also published in the National Institute in Aerospace Journal, INCAS, Volume 7 issue 2 / 2015. http://bulletin.incas.ro/volume_7_issue_22015.html.

124. Stouffer, D.C and Abuelfoutouh, N. :A Potential Function Derivation of A Constitutive Equation for inelastic Material Response. Symposium on Nonlinear Material Constitutive Relationships For High Temperature Applications, NASA Conference Publication 2271, pp 153-177, May (1982).

125. Abuelfoutouh, N. and Stouffer, D.C.:A Derivation of a constitutive Equation For The Materials That Can Be Described By A Rate Potential Function., Eighteenth Midwest Conference, University of Iowa, May (1983).

126. Abuelfoutouh, N. :A Thermodynamically Consistent Model For Inelastic Material Response. PhD Dissertation, Aerospace Engineering, University of Cincinnati, June (1983).

127. Stouffer D.C and Abuelfoutouh. Derivation of A Thermodynamically Consistent State Variable Constitutive Relationship That Accounts For Damage., Proceedings of the symposium of SECTAM XIII Conference, pp72-76, April (1986).

128. Abuelfoutouh,N.:A Non-Iterative Finite Element Solution For Structures With Time-Dependent Material Nonlinearity., Proceedings of SECTAM XIII Conference, pp 457-462, April (1986).

129. Abuelfoutouh,N.:A Thermodynamically Consistent Prediction of Isothermal Time-Dependent Inelastic Response of A Damaging Material., Proceedings of the 28th AIAA/ASME/ASCE/AHS, pp 867-871, April (1987).

130. Abuelfoutouh,N.:Application of A Non-Iterative Finite Element Solution For Structures With Time-Dependent Material Nonlinearity., Proceedings of the 28th AIAA/ASME/ASCE/AHS, pp 861-866, April (1987).

131. Abuelfoutouh, N., Verrilli, M.J. and Halford, G.R. : Isothermal Life Prediction of A Composite Laminate Using A Damage Mechanics Approach., Proceedings on the Symposium on High Temperature Composites, ASC, pp 121-130, (NASA TM 102032), June (1989).

132. Abuelfoutouh, N.: Prediction of Isothermal Fatigue Response And Associated Life of High Temperature Isotropic Materials., Proceedings of Plasticity’89 pp 199-202, July (1989).

133. Abuelfoutouh,N. and Halford, G.R.: Derivation of Fatigue Rules Using Damage Mechanics Approach., Proceedings of International Symposium For Testing and Failure Analysis., ISTFA/89,ASM, pp537-544, Nov (1989)

134. A.A. Hashim and M.N.Abuelfoutouh: Interaction of Turbine Rotor Cooling and Blade High Temperature Low Cyclic Fatigue Life., Journal of Engineering and Applied Science, Faculty of Engineering Cairo University , Vol 38, pp601-616, (1990).

135. Abuelfoutouh,N.:Evaluation of the Effect of Creep and Mean Stress On Fatigue Life Using A Damage Mechanics Approach., ASTM Journal STP 1122, pp 77-83(1991).

136. Abuelfoutouh,N:Continuum Damage Finite Element Approach To Predict Composite Structure Damage And Failure Modes., 7th Technical Symposium of The American Society of Composites, ASC, pp 1094-1103, October, (1992).

137. Abuelfoutouh,N.: Preliminary Design of Unstiffenned Composite Shells., Proceedings of the 9th International Conference On Composite Materials, ICCM, July (1993).

138. S.D. Hassan, M.S. Bayoumi, M.N. Abuelfoutouh, A.A. Hashem, Design and Prototype Production of Small Wind Turbine For Low Wind Speed. Published in the Journal of Technology, The Egyptian Syndicate of Engineers, Vol. 1 No. 1, pp 13-21, June (1994).

139. Abuelfoutouh,N: Isothermal Rate-Dependent Failure Prediction of Composite Materials. 7th Applied Mechanics and Mechanical Engineering (AMME),pp 61-71 May (1996).

140. Abuelfoutouh,N: Rate-Dependent Failure of Statically Determinate Composite Structures. 7th Applied Mechanics and Mechanical Engineering (AMME),pp 49-59 May (1996).

141. Tarek Hatem, M. Nader Abuelfoutouh, Hany Negm, “Application of Genetic Algorithms (GA) and Neural Networks (NN) to Health Monitoring of Composite Structures, 2nd European Workshop on Structural Health Monitoring Munich, Germany July 7-9, 2004.

142. T.M.Hatem , M.N. Abuelfoutouh , H.M.Negm “Structural health monitoring of metallic structure using modal properties”, Journal of Engineering and Applied Science, Cairo University, Vol 52, 2005 pp 609.

143. M. M. El-Farran1, N.M. Abuelfoutouh2, H. M. Negm3 ” Impact Damage Prediction In Shell Structures ” MTC conference Cairo Egypt May 2008.

144. Abdelal, Gasser F., Abuelfoutouh, Nader, Gad, Ahmed H. “Finite Element Analysis for Satellite Structures: Applications to Their Design, Manufacture and Testing” , Springer, ASIN: B011DB134Q, 2013.

145. Elfatih G. HAMDI, Gamal M. Sayed EL-BAYOUMI, Ayman H. M. KASEM, “Structured Robust Control for Small UAV”, INCAS BULLETIN (2015)Vol. 7. no. 2 pp. 81 – 91.

146. Tamer M Ahmed, Karim K Ahmed, Ayman H. Kassem “ Commercial Cameras Accurate Focal Length Estimation for Satellite Optical Observation”, International Journal of Aeronautical Science & Aerospace Research (IJASAR) (2015) 2(4), 39-47.

147. Tarek Naem Deif, Ayman H. Kassem, Gamal M. El Baioumi,” Modeling, Robustness, and Attitude Stabilization of Indoor Quad Rotor Using Fuzzy Logic Control”. International Review of Aerospace Engineering (2014) Vol. 7. no. 6, pp. 192-201.

148. Tarek Naem Deif, Ayman H. Kassem, Gamal M. El Baioumi,” Modeling and Attitude Stabilization of Indoor Quad Rotor”. International Review of Aerospace Engineering (2014) Vol. 7. No. 2, pp. 55-60.

149. Wafaa A. Arakat, Amira Y. Haikal, Ayman H. Kassem, “Adaptive Neuro-fuzzy Controller for Multi-layered Switched Reluctance Motor”, International Journal of Computer Applications, Volume 44 – No. 1, April (2012), pp. 22-28.

150. Ayman Hamdy Kassem, “Efficient neural network modeling for flight and space dynamics simulation”, International Journal of Aerospace Engineering, art. no. 24729, doi:10.1155/2011/247294.

151. Ayman Hamdy Kassem, “Optimum Placement of Satellite Components with A genetic Algorithm”, International Review of Aerospace Engineering (2011) Vol. 4. n. 2, pp. 87-92.

152. Ahmed Z. Al-Garni, Ayman H. Kassem, Farooq Saeed, Faizan Ahmed, “Effect of glass slope angle and water depth on productivity of double slope solar still”, Journal of scientific and industrial research, vol.70, October (2011), pp. 884-890.

153. Ashraf Omran and Ayman Kassem, “Optimal task space control design of a Stewart manipulator for aircraft stall recovery”, Aerospace Science and Technology, July (2011),15 (5), pp. 353-365.

154. Bilal A. Siddiqui, Ayman H. Kassem, Ahmed Z. Al-Garni, “Using USAF DATCOM to Predict Nonlinear Aerodynamics of Structurally Impaired Aircraft”, International Review of Aerospace Engineering (2010) Vol. 3. n. 2, pp. 125-133.

155. A. Omran, M. Bayoumi, A. Kassem, and G. El-Bayoumi. “Optimal Forward Kinematics Modeling of a Stewart Manipulator using Genetic Algorithms”, Jordan Journal of Mechanical and Industrial Engineering (JJMIE) Vol. 3, No. 4, December (2009), pp. 280-293.

156. A. Omran, A. Kassem, G. El-Bayoumi, and M. Bayoumi, “Mission-Based Optimal Control of Stewart Manipulator”. Aircraft Engineering and Aerospace Technology Journal, Vol. 81, No. 3, (2009), pp. 226-233.

157. A. Omran, G. El-Bayoumi, M. Bayoumi, and A. Kassem, “Genetic Algorithm Based Optimal Control for a 6-DOF Non Redundant Stewart Manipulator”. International Journal of Mechanical Systems Science and Engineering, Vol. 2, No. 2, (2008), pp. 73-79.

158. Ayman Kassem, Ahmed Sameh, “A General Framework for Lumbar Spine Modeling and Simulation”, International Journal of Human Factors Modelling and Simulation – Vol. 1, No.2 (2008) pp. 211 – 224.

159. A. Z. Al-Garni, A. H. Kassem, A. M. Abdallah, “Aerodynamic-Shape Optimization of Supersonic-Missiles Using Monte-Carlo”, International Review of Aerospace Engineering – February (2008), pp. 1-9.

160. Ayman Kassem, “Minimum-Time Dispatch Problem: Formulation and Solution”, Journal of Aerospace Computing, Information, and Communication 2007 vol.4 no.10, pp.996-1002.

161. Ayman Kassem, Ahmed Sameh, ” Lumbar Spine: Parameter Estimation for Realistic Modeling”, WSEAS transactions on applied and theoretical mechanics, Issue 5, Volume 2, May (2007), pp. 113-118.

162. Ahmed Al-Garni and Ayman Hamdy Kassem, “On the optimization of aerospace plane ascent trajectory,” Transactions of the Japan Society for Aeronautical and Space Sciences, Vol. 50, No. 168, August, (2007), pp.113-120.

163. Ayman Hamdy Kassem, “Trajectory Optimization via Simulation Using Incremented Genetic Algorithms,” the Canadian Aeronautics and Space Journal, Vol.52, No.1, March, (2006), pp. 15-20.

164. Kassem, A., “Swing-Up Control of Inverted Pendulum,” Journal of Engineering andApplied Science, Cairo University, Vol. 52, No. 6, December (2005), pp. 1163-1178.

165. Habib, T., Kassem, A. and El-Bayoumi, G., “GPS-Based Small Satellite Position and Attitude Determination Simulator,” Journal of Engineering and Applied Science, Cairo University, Vol. 52, No. 1, February (2005), pp. 71-87.

166. Brett Newman and Ayman Kassem, “Analytical Relationships for Linear Quadratic Aeroelastic Flight Control Eigenvalues,” AIAA-Journal of Guidance, Control and Dynamics, Vol. 20, No. 6, (1997), pp. 1149-1156.

167. Ayman Hamdy Kassem, “Rover Trajectory Planning via Simulation Using Incremented Particle Swarm Optimization”, Proceedings of the 2010 International Conference of Scientific Computing, CSC 2015, Las Vegas, Nevada, USA, July 27-30, (2015), pp. 140-146.

168. Ayman Hamdy Kassem, “Aerospace Engineering Department at Cairo University: past, present, and future”, 6th International Conference on Recent Advances in Space Technologies, Istanbul, Turkey, 12-14 June, (2013).

169. Ayman Kassem, “Efficient Neural Network Modeling for Flight Dynamics Equations”, Proceedings of the 2010 International Conference on Modeling, Simulation & Visualization Methods, MSV 2010, Las Vegas, Nevada, USA, July 13-16, (2010), pp.48-352.

170. Ayman Kassem, “Modeling and Visualization of Intervertebral-Disc Dynamics for Real-Time Systems”, Proceedings of the 2009 International Conference on Modeling, Simulation & Visualization Methods, Las Vegas, Nevada, USA, July 14-17, (2009), pp.62-66.

171. Ahmed Sameh, Ayman Kassem, “Modeling and Simulation of Human Lumbar Spine”, Proceedings of the 2008 International Conference on Modeling, Simulation & Visualization Methods, Las Vegas, Nevada, USA, July 14-17, (2008), pp.15-21.

172. Al-Garni, A., Kassem, A., and Irfan, R. “Spacecraft Attitude Control using Internal Model Principle”, Fourth GCC IEEE Conference, November, (2007).

173. Ahmed Z. Al-Garni, Ahmad Jamal, Farooq Saeed, Ayman H. Kassem, “Failure Rate Analysis of Boeing 737 Brakes Employing Neural Network”, 7th AIAA Aviation Technology, Integration and Operations Conference, Belfast, Northern Ireland, 18-20 September (2007), AIAA-2007-7854.

174. Al-Garni, Shafiq, M., Kassem, A., and Irfan, R., “Feed Forward Adaptive Learning Based Tracking of Spacecraft Attitude”, 15th Mediterranean Conference, Greece, June, (2007).

175. Ahmed Z. Al-Garni, Farooq Saeed, Abdullah M. Al-Garni, and Ayman Kassem, “Experimental and Numerical Investigation of 65-deg Delta and 65/40-deg Double-Delta Wings,” 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, Jan. 9-12, (2006), AIAA-2006-63.

176. Ahmed Al-Garni and A. Kassem, “Optimizing Space plane Ascent Trajectory with Thermal Constraints Using Genetic Algorithms,” AIAA/CIRA 13th International Space Planes and Hypersonic Systems and Technologies Conference, Capua, Italy, 16 – 20 May (2005).

177. A. Kassem, “A Heuristic Approach for a Minimum Time Dispatch Problem,” 43rd Aerospace Sciences Meeting and Exhibit, AIAA-2005-1133, Reno, Nevada, 10-13 Jan- (2005).

178. M.S. Ahmed, A. H. Kassem, M. S. Bayoumi, G.M. El Bayoumi, “Fault Diagnosis of Hydraulic cylinder Circuit Using Neural Network,” 11th International Conference on Applied Mechanics and Mechanical Engineering (AMME), Cairo, Egypt, November 23-25, (2004).

179. M.S. Ahmed, A. H. Kassem, M. S. Bayoumi, G.M. El Bayoumi, “Fault Diagnosis of Hydraulic Variable-Displacement-Swash-Plate Axial–Piston Pump Using Neural Network,” 11th International Conference on Applied Mechanics and Mechanical Engineering (AMME), Cairo, Egypt, November 23-25, (2004).

180. A. Z. Al-Garni, M. Tozan, A. Kassem, S. Farooq, “ Reliability analysis of aircraft air conditioning packs,” 3rd Aircraft Engineering Symposium, Jeddah, Saudi Arabia, Nov. (2004).

181. A. Kassem, and Ihab G. Adam, “Optimizing neural networks for leak monitoring in pipelines,” ASME pressure vessels and piping Conference, San Diego, CA, July (2004), pp. 57-61.

182. A. Kassem, Ahmed Sameh, and Keller TS, “Modeling and simulation of lumbar spine dynamics,” the 15th IASTED International Conference on modeling and simulation, Marina del Rey, CA, USA March 1-3, (2004), pp. 250-255.

183. Ihab G. Adam and A. Kassem, “Artificial Neural Network Suitability for Pipelines Leak Detection and Location,” RETBE’02(Role of Engineering towards a Better Environment, 4th International Conference) Alexandria, Egypt, 21 – 23 December (2002), pp. 173-187.

184. A. Kassem, Ahmed Sameh, “A Fast Technique for Modeling and Control of Dynamic Systems,” ISCA 17th International Conference on Computers and Their Applications, Boston MA, July 18-20, (2002), pp. 83-87.

185. A. Kassem, Mohamed A. Sameh, and Abdel-Malek Karim, “A Spring-Dashpot- String Element for Modeling Spinal Column Dynamics”, Proceedings of the International Workshop on Growth and Motion in 3D Medical Images, Copenhagen, Denmark, May 28- June 1, 2002.

186. A. Kassem, A. Afifi, A. Rafea, “Using Genetic Algorithms to Solve The Maximum Destruction Problem,” The tenth International Conference on Artificial Intelligence Applications, Cairo, Egypt, February 6-9, (2002), pp. 207-213.

187. A. Kassem and B. Newman, “Optimal Closed-Loop Analytic Relationships via Cost Function Imbedding,” AIAA Guidance, Navigation, and Control Conference, August (1999), Portland, Oregon, AIAA-1999-4158, Vol. 2, pp. 1191-1200.

188. Ayman Kassem, Brett Newman, “Symbolic analysis of linear quadratic control numerator and denominator factors”, AIAA Guidance, Navigation, and Control Conference and Exhibit, Aug. 10-12 (1998), Boston, MA, AIAA-1998-4424.

189. B. Newman and A. Kassem “Analytical Relationships for Optimal Aeroelastic Flight Control Eigenvalues,”, AIAA Guidance, Navigation, and Control Conference, Aug. 11-13 (1997), New Orleans, Louisiana, AIAA-97-3621.

190. Newman and A. Kassem, “Analytical Expressions for Linear Quadratic Aeroelastic Flight Control Eigenvalues,” AIAA Nonlinear Dynamical Systems Symposium, Jan. 6-9 (1997), Reno, Nevada, AIAA-97-0457.

191. Brett Newman and A. Kassem, “Investigation of Inner Loop Flight Control Strategies for High-Speed Research,” NASA Technical Report CR-1999-209522, December, 1999

192. A. Desoki, H. Morimura and I. Hagiwara, “General Design of the Forming Collar of the Vertical Form, Fill and Seal Packaging Machine Using the Finite Element Method,” Packaging Technology and Science, vol. 24, pp. 31-47, 2011.

193. A. Desoki, J. Takada and I. Hagiwara, “Improved finite samples resampling for unbiased wide-band direction of arrival estimation,” Acoustical Science and Technology, vol. 30, no. 6, pp. 417-428, 2009.

194. A. Desoki, J. Takada and I. Hagiwara, “Efficient array design algorithm for wide-band application of the MUltiple SIgnal Classification algorithm,” Acoustical Science and Technology, vol. 30, no. 3, pp. 187-198, 2009.